|
Tiger Saber Boom Flail Mower |
|
|
|
|
| Model | |
| SBF-50C | |
| Features | |
| Reaches over obstacles such as guard rails, stumps, signs and waterways | |
| Joystick controlled |  |
| Ideal for cutting grass and small brush on roadsides, irrigation ditches or waterways | |
| 25' reach | |
| Cuts trees up to 4" | |
| Easy to transport | |
| Nitrogen accumulator on inner lift cylinder | |
| Operator protective polycarbonate window | |
| Specifications | |
| Cutter Width | 50" |
| Cutter Reach | Out: 25' Up: 22' 6" Down: 14' 6" |
| Cutter Head | Tiger SBF-50H Flail Cutter Head |
| Main Frame | Solid
type Frame mount |
| Cylinders | 3 lift
cylinders mounted on top of boom Industrial & welded Spherical bearings at each end Nitrogen accumulator for smooth boom operation Auto-cushion end stroke device on horizontal position cylinder and inner lift cylinder |
| Inner & Outer Booms | Constructed
of 70,000 PSI steel reinforced with 100,000 PSI steel Boom pivot points have replaceable steel-backed acetyl bearings with grease pockets |
| Hoses | High
pressure drive and return 1" I.D. (Inner Diameter) Suction 1-1/2" I.D. (Inner Diameter) |
| Lift Control Valve | 4 bank
electro-hydraulic proportional Load sensing Single joystick controller Manual over-ride at operator's position |
| Main Control Valve | Non-restrictive Electric solenoid type Starter lock out switch Optional hydraulic brake |
| Hydraulic Filter | In
reservoir 75 GPM rated 25 micron element Restriction gauge |
| Hydraulic Pump | Steel
gear type with cast steel housing 98 hp rated |
| Wheel Weight | 2550 lbs
total (2 pieces: one 1,700 lb and one 850 lb weight) |
