|
Tiger TV-140 Triple Gang Flail Mower |
|
|
|
|
| Model | |
| T3F-282C | |
| Use | |
| Triple
Gang Flail Mowers are excellent for mowing large areas. This unit will
cut a 21' wide path in just one pass. Designed for operator comfort and
visibility, this unit is superior to pull-behind units because it cuts
the grass before the tractor wheel tracks run over it. The grass is
still tall and uncrushed when the blade touches it, resulting in a
cleaner cut. This unit is most often used for airports, irrigation districts, interstates, parks and waterways. |
|
| Features | |
| 2 side mowers and 1 rear mower provide large cutting widths | |
| Non-jamming, self-cleaning knives | |
| Ground roller is infinitely adjustable from ½" to 6" | |
| Side mowers are hydraulically powered with neutral start switch | |
| Available in standard cut or smooth cut models | |
| Designed and build for everyday use | |
|
Options |
|
| Roto-Screen to help prevent debris and chaff from clogging the radiator |  |
| Specifications | |
| Cutter Width | Left:
90" Right: 90" Rear: 102" |
| Overlap | 19" overlap on each side |
| Cutter Head | ½"
inner end plates 3/8" outer plates |
| Cutter Head Weight | 1,143
lbs on side units 1,518 lbs on rear unit |
| Cutter Head Arc | 165º from vertical position (side units) |
| Cutter Head Inboard Travel | 22" |
| Cutter Shafts | Dynamically
balanced 6" diameter 3/8" wall tubing with 2-3/16" diameter stub shafts and bearings 2,400 RPM |
| Cutter Assembly | Hydraulically driven |
| Cutter Knives | Standard
Model: 300 self-cleaning, reversible or all-purpose knives Smooth Cut Model: 150 knives |
| Ground Roller | Infinitely
adjustable height from 1/2" to 6" 1-3/8" grease type Double row spherical bearings |
| Knife Swing Circumference | 58 1/2" |
| Skid Shoes | Removable |
| Hydraulic Motor | 67 hp rated |
| Hydraulic Pump | Tandem
gear 150 hp rated per section, 300 hp total |
| Hydraulic Filter | Return
line in tank Rated at 75 GPM |
| Hydraulic Cooler | Forced air |
| Lift Assembly | Direct connected |
| Lift Control Valve | Metering
type Spring centered Detented float position with pilot reliefs |
| Hoses | High pressure drive and return: 1" I.D. (Inner Diameter) |
| Oil System | 26 gallon |
| Gear Box | Rear
unit 90 hp constant 135 hp intermittent |
| Drive Belt System | Automatic belt tightener |
| Front Deflector Shield | Standard on smooth cut model |
| Locks | Travel
and transport locks No hydraulic pressure required |
| Discharge Flap | Rubber safety discharge flap |
| Hitch | 3 point hitch, Category II (front unit) |
| Warranty | 1 Year Limited |
